Rollforming machine for the automatic production of trapezoidal and similar profiles up to 160 mm height. According to the requirements it can process coil widths up to 1.500 mm. This equipment is optionally available either as a pre-cut – type (the sheet will be cut to the required length before being profiled) or as an after-cut type (the ready profile will be cut by the Flying-Shearing machine to the required length after the profiling process).

It can be also chosen between the single-type (for one profile type only) and multi-(cassette) type line (for production of different profile types replacing cassettes with different roll-forming units).

High Profile Rollforming
Technical
Specifications

Features

  • Accuracy and precision for high profiles up to 160 mm
  • enables weight savings on secondary steel construction due to higher load bearing capacity
  • fully automated fast production, computer controlled

Machine Specs

metricimperial
Machine roll-forming line roll-forming line
Profile type trapezoidal (and similar) profiles with up to 160 mm height trapezoidal (and similar) profiles with up to 160 mm height
Profile length up to 24.000 mm up to 24.000 mm
Sheet thickness 0.5–1.5 mm steel 0.5–1.5 mm steel
Primary material steel coil, up to 1.500 mm wide, max. 15 t steel coil, up to 1.500 mm wide, max. 15 t
Max. speed 0–60 m/min, infinitely adjustable 0–60 m/min, infinitely adjustable
Control system PLC with operating panel PLC with operating panel